Character COG Module manufacturers

Discussion in 'Subrion CMS Plugins Discussion' started by adswer3, Nov 21, 2018.

  1. adswer3

    adswer3 New Member

    chip on glass COG
    character COG lcd display
    16x2 character COG lcd display ADG1602A3
    Model No. ADG1602A3
    ►COG LCD 16x2
    ►Character LCD
    ►5 x 8 dots includes cursor
    ►Built-in controllerSITRONIX ST7038Si-1A
    ►1/17Duty, 1/5 Bias
    ►+5V power supply
    ►Interface: I2C Interface MPU
    Description of character COG lcd display ADG1602A3
    Character COG lcd display ADG1602A3 is a very unique 16x2 Character LCD Module display in FSTN Negative, Transmissive,Six O'clock viewing direction, Wide Temperature Range (Operating Temp: -20°C to 70°C, Storage Temp: -30°C to 80°C), and White LED Backlight.
    1. FEATURES
    The features of character COG lcd display ADG1602A3 are as follows
    * Display mode : FSTN, Negative, Transmissive
    * Color : Display dot : White
    Background: Black
    * Display Format : 16 Character X 2 Line
    * IC : SITRONIX ST7038Si-1A
    * Interface Input Data : I2C Interface MPU
    * Driving Method : 1/17 Duty, 1/5 Bias
    * Viewing Direction : 6 O’clock
    * Backlight : White
    * LCM technological conditions: RoHS
    2. MECHANICAL SPECIFICATIONS
    Item Specification Unit
    Module Size80.2(W) x 32.2(H) x 8.4MAX(T)mm
    Viewing Area74.0MIN(W) x 19.0MIN(H)mm
    Effective Display Area71.52(W) X 15.98(H)mm
    Dot Size0.72(W) x 0.85(H)mm
    Dot Pitch0.75 (W) x 0.88(H)mm
    3. ELECTRICAL SPECIFICATIONS
    3-1. Absolute Maximum Ratings (Vss=0V)
    Item Symbol Standard Value Unit
    Min. Typ. Max.
    Supply Voltage For LogicVDD-0.3-+3.6V
    Supply Voltage For LCD DriveV0-XV0-0.3-+7.0V
    Input VoltageVIN-0.3-VDD+0.3V
    Operating Temp.TOP-0-+50°C
    Storage Temp.TST-20-+60°C
    3. ELECTRICAL SPECIFICATIONS (Continued)
    3-2. Electrical Characteristics (Vss=0V)
    NOTE: 1) Duty Ratio=1/17, Bias Ratio=1/5
    2) Measuring in Dots ON-state
    TERMINAL PIN FUNCTION
    FAQ:
    1.Why are LCD polarizers required?
    Light must be present for the liquid crystal display (LCD) to be readable. It illuminates the display, either by entering the display as ambient light passing through the front of the glass (office light, sun light), or it is supplied from a backlight that is placed behind the LCD. In some cases light is a combination of both ambient light and backlight.
    2.How many types of LCD polarizers are available?
    These are the three types of LCD polarizers: Reflective, Transflective, and Transmissive. The correct polarizer is determined by the different lighting conditions your product will operate in or be exposed to.
    3.What is LCD modules with a Reflective Polarizer:
    The reflective LCD polarizer is nothing more than a mirror that is applied to the bottom layer of glass. It reflects 100% of the ambient light entering through the top layer of glass back towards the user.
    4.What is LCD Modules with a Transmissive Polarizer:
    A Transmissive LCD polarizer, unlike the reflective polarizer, allows all the light from the backlight to pass thought the bottom and top layer of glass towards the user. The backlight must be on for the display to be readable.
    Ambient light from office lights or sun light will pass through the bottom layer of glass and not reflect back towards the top glass; so ambient light will add very little illumination to the display. Character COG Module manufacturers
    website:http://www.amotec-lcd.com/cog-module/character-cog-module/

Share This Page